How to Replace Air Filter — Toyota Corolla
Replacing the air filter on your Toyota Corolla (2009–2015) helps improve engine performance, fuel...
How to Perform an Oil Change — Ford Focus (2012–2018)
Regular oil changes keep your Ford Focus engine running smoothly, extend engine life, and help with fuel efficiency. This DIY oil change will take about 30–45 minutes.
Tools & Materials You Will Need
- 5W-20 synthetic oil (4.5–5 quarts — check your owner’s manual for exact capacity)
- New oil filter (compatible with your Focus engine)
- Oil filter wrench
- Socket wrench (typically 13mm for drain plug)
- Oil drain pan (at least 6-quart capacity)
- Funnel
- Jack and jack stands (or ramps)
- Gloves and safety glasses
- Clean rags or paper towels
Applicable Models
Ford Focus 2012, 2013, 2014, 2015, 2016, 2017, 2018 (2.0L 4-cylinder gasoline engines)
Safety Tips
- Make sure the engine is cool before starting.
- Always securely jack and support the car on jack stands or ramps.
- Dispose of used oil properly — most auto parts stores accept waste oil
Step-by-Step Instructions
01. Lift and Secure the Vehicle
- Park on a flat surface and engage the parking brake.
- Use a jack to lift the front of the car and secure it on jack stands or use ramps.
02. Drain the Old Oil
- Place the drain pan under the oil pan.
- Use a socket wrench to remove the oil drain plug.
- Let oil fully drain (5–10 minutes).
03. Replace the Drain Plug
- Clean the drain plug and reinstall it.
- Tighten securely (do not overtighten; typically ~20 ft-lbs torque).
04. Remove Old Oil Filter
- Position drain pan under filter area.
- Use oil filter wrench to loosen and remove the old filter.
- Wipe mating surface clean.
05. Install New Oil Filter
- Apply a bit of new oil to the rubber gasket of the new filter.
- Screw on the new filter by hand until snug, then turn an additional ¾ turn.
06. Add New Oil
- Remove oil fill cap under hood.
- Using a funnel, pour in fresh oil (start with 4 quarts, then check level).
07. Check Oil Level
- Lower the car.
- Start engine and let it run 30 seconds, check for leaks.
- Turn off, wait 2 minutes, then check dipstick.
- Add oil as needed to reach full mark.
08. Clean Up
- Dispose of oil and filter at a recycling center.
- Wipe up any spills.
09. Common Issues & Tips
- Don’t overtighten the oil filter or drain plug
- Always double-check oil level after engine runs
- Replace the oil drain plug washer if worn
Watch tutorial video
Final Advice
Change your oil every 5,000–7,500 miles depending on your driving conditions and oil type. Always use the recommended oil grade for your specific engine.
Add a comment
Comments (0)
Categories
- Auto Repair Guides (3)
- Brakes & Suspension (1)
- Electric Vehicles (EVs) (1)
- Innovation & Future Tech (1)
- Maintenance & DIY (2)
- News and Update (2)
Recent Posts
Editor's Profile
autotechub
Blog Editor
As a dedicated member of the AutotecHub team, I’m passionate about delivering top-tier automotive solutions. Whether it’s troubleshooting complex issues, offering expert advice, or collaborating on projects, I’m always ready to contribute to providing high-quality service and ensuring customer satisfaction. Driven by a love for cars and technology, I’m committed to helping our clients stay ahead with the latest in auto tech and innovation.
Related posts
How to Replace Brake Pads on a Toyota Corolla
Replacing the brake pads on a Toyota Corolla (2009–2015) is a routine maintenance job...
Award-winning, family owned dealership of new and pre-owned vehicles and auto parts with several locations across the city. Lowest prices and the best customer service guaranteed.
Copyright © 2025. All rights reserved.